ARROW AR108-A OWNER'S MANUAL & ASSEMBLY INSTRUCTIONS Pdf Download (2024)

ARROW AR108-A OWNER'S MANUAL & ASSEMBLY INSTRUCTIONS Pdf Download (1)

Manuals
Brands
Arrow Manuals
Outdoor Storage
AR108-A

Hide thumbs Also See for AR108-A:

(48 pages)

Table Of Contents 33

Contents
Table of Contents
Bookmarks

Table of Contents

Building Dimensions
Foundation and Anchoring
Tools and Materials
Selecting and Preparing Your Site
Safety Precautions
Care and Maintenance
See Also
ARROW STORAGE PRODUCTS LW108 SERIES OWNER'S MANUAL & ASSEMBLY MANUAL Pdf Download ARROW LW108FB OWNER'S MANUAL & ASSEMBLY INSTRUCTIONS Pdf Download Arrow Newport 10 ft. x 8 ft. Steel Shed : Instructions Arrow Woodlake 10' x 8' Storage Shed (WL108)
Accessories
The Foundation for Your Building
Arrow Floor Frame Kit
Wood Platform
Concrete Slab
Anchoring down the Building
Arrow Anchoring Kit
Anchoring into Wood/Post
Anchoring into Concrete
Hardware
Parts List
Assembly by Key No.
Floor Frame Assemblies
Frame Assemblies
Roof Beam Assemblies
Door Track Assembly
End View
Floor Frame
Corners
Top View
Frames
Wall Panels
Front Channel/Door Jamb
Gable Assemblies
Gables/Braces
Roof Beam/Braces
Right Roof Panel
Roof Assembly
Roof Trim
Door Assembly
Facts about Rust

Advertisem*nt

Quick Links

1 Building Dimensions
2 Foundation and Anchoring
3 Tools and Materials
4 Parts List
5 Frame Assemblies
Download this manual

BUILDING DIMENSIONS

*Approx.

Foundation

Size

10' x 8'

121" x 92 3/4"

3,0m x 2,3m 307cm x 236cm

AR108-A

Missing Parts, Questions on Assembly?

Do not return to dealer, they are not

equipped to handle your requests.

* Size rounded off to the nearest foot

Storage Area

Sq. Ft. Cu. Ft.

Width

440

6,9m

12,5m

LW108

Call: 1-800-851-1085

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE

MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES

TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ

SAFETY INFORMATION PROVIDED IN THIS MANUAL

BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES

WHEN HANDLING METAL PARTS.

Exterior Dimensions

(Roof Edge to Roof Edge)

Depth

Height

123 1/4"

95 1/4"

81 3/8"

313cm

242cm

207cm

Interior Dimensions

(Wall to Wall)

Width

Depth

Height Width Height

118 1/4"

90"

80 1/8" 55 1/2"

300cm

229cm

204cm

Door

Opening

60"

141cm 152cm

Table ofContents

Advertisem*nt

Table of Contents

Related Manuals for Arrow AR108-A

(48 pages)
(34 pages)
(45 pages)
10’ x 12’ (48 pages)
(34 pages)
(40 pages)
Outdoor storage shed (40 pages)

(32 pages)
(32 pages)
Outdoor storage shed (37 pages)
(36 pages)
(36 pages)
Outdoor storage shed (32 pages)
20' x 20' (34 pages)

Summary of Contents for Arrow AR108-A

Page 1 Owner's Manual & Assembly Instructions Model No. AR108-A LW108 Missing Parts, Questions on Assembly? Call: 1-800-851-1085 Do not return to dealer, they are not equipped to handle your requests. CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP.
Page 2 BEFORE YOU BEGIN..Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly Instructions: Instructions are supplied in this manual and contain all appropriate information for your building model.
Page 3 PLAN AHEAD..Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Teamwork: Whenever possible, two or more people should work together to assemble your building.
Page 4 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in the pieces of your building since some contain assembly of this building. Be familiar with the sharp edges.
Page 5 CARE & MAINTENANCE..A5 Web Finish: For long lasting finish, periodically clean and wax the exterior surface. Touch- up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom.
Page 6 ACCESSORIES..A6 WEB ROOF STRENGTHENING FLOOR FRAME KITS (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof by 50%. ANCHOR KITS Model No. AK4 MODELS FB47410, FB5465, FB106-A Anchor Kit contains heavy-duty steel FB109-A and FB1014-A augers, 60' (18m) of steel cable and 4 cable...
Page 7 THIS PAGE LEFT BLANK INTENTIONALLY...
Page 8 THIS PAGE LEFT BLANK INTENTIONALLY...
Page 9 Foundation The Foundation For Your Building OPTION 1: ARROW FLOOR FRAME KIT: (Order No. FB109-A or 68385-A) Arrow has the best base for your building in this simple kit. It keeps stored items above the ground. This kit should be used with one of the following: A.
Page 10 Anchoring Anchoring Down The Building It is important that the entire floor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: Arrow Anchoring Kit: (Model No. AK4 or 60298) Use 1/4" Wood Screws. There are 1/4" (0,63cm) dia. Recommended for use with any suggested base.
Page 11 Hardware Remove from bag of screws and save for the last step 65900A 65103 #10Bx1/2" Black Screw (8) 65923 65004 #8-32 Hex Nut (171) (Packed with Screws) #8-32x3/8" Bolt (171) #8Ax5/16" Screw (338) 65109 67468 66646 #8-32 Acorn Nut (4) Peak Cap (2) 66045 Washer (369)
Page 12: Parts List
Parts List Assembly Part Part Quantity Check Key No. Number Description in Carton List 3719 Door Handle Brace 7332 Wall Panel (Side) 9373 Front Wall Panel 9365 Front Wall Channel 5986 Rear Wall Angle 8576 Right Gable 8577 Left Gable 10497 Horizontal Door Brace 6278...
Page 13 Assembly by Key No. 34 17...
Page 14 ● ● ● ● ● 8934 Ramp (1) ● Parts Needed For ● ● ● ● ● ● 9367 Front Floor Frame (2) Step 1 ● ● ● ● ● 8936 Rear Floor Frame (2) Floor Frame Assemblies ● ● ● ● ● 8937 Side Floor Frame (4) The front floor frame is made up of three pieces.
Page 15 ● ● ● ● ● 5986 Rear Wall Angle (2) ● Parts Needed For ● ● ● ● ● ● 9917 Rear Wall Channel (2) Step 2 ● ● ● ● ● 9922 Side Wall Channel (4) Frame Assemblies ● ● ● ● ● 8841 Side Wall Angle (4) The main frame pieces reinforce the walls.
Page 16 ● Parts Needed For ● ● ● ● ● ● 10470 Roof Beam (8) Step 3 Roof Beam Assemblies The roof beams join the two gables and support the roof panels. The main roof beam is made up of four pieces 10470 overlapped back to back at the cen- ter.
Page 17 ● Parts Needed For ● ● ● ● ● ● 6403 Door Track Splice (1) Step 4 ● ● ● ● ● 9366 Door Track (2) Door Track Assembly NOTE: Door Track Splice (painted part) The door track assembly supports the sliding doors and reinforces the front wall.
Page 18 ● ● ● ● ● Front Floor Assembly (1) ● Parts Needed For ● Step 5 ● ● ● ● ● Side Floor Assembly (2) Floor Frame ● ● ● ● ● Rear Floor Assembly (1) RIGHT REAR 8937 STEP Assemble the four corners of the 8936 floor frame using two screws at each...
Page 19 ● Parts Needed For ● ● ● ● ● ● 6515 Wall Panel (2) Step 6 ● ● ● ● ● 9373 Front Wall Panel (2) Corners ● ● ● ● ● 8470 Corner Panel (4) NOTE Narrow The remainder of the building assembly Side 8470 requires many hours and more than one...
Page 20 ● ● ● ● ● Door Track Assembly (1) ● ● ● ● ● Rear Wall Angle Assembly (1) ● Parts Needed For ● Step 7 ● ● ● ● ● Side Wall Angle Assemblies (2) Frames ● ● ● ● ● Rear Wall Channel Assembly (1) ●...
Page 21 ● Parts Needed For ● ● ● ● ● ● 7332 Wall Panel (4) Step 8 ● ● ● ● ● 6515 Wall Panel (4) Wall Panels The wall panels come in two widths. STEP Each wall panel has a crimped rib on 6515 6515 one side.
Page 22 ● Parts Needed For ● ● ● ● ● ● 9369 Door Jamb (2) Step 9 ● ● ● ● ● 9365 Front Wall Channel (2) Front Channel/Door Jamb The door jambs reinforce the door opening and provide an attractive 9365 trim.
Page 23 ● Parts Needed For ● ● ● ● ● ● 8576 Right Gable (2) Step 10 ● ● ● ● ● 8577 Left Gable (2) Gable Assemblies ● ● ● ● ● 6635 Roof Beam Bracket (4) The gables go on top of the front and rear walls to support the roof beams.
Page 24 ● ● ● ● ● Left Gable Assemblies (2) ● Parts Needed For ● Step 11 ● ● ● ● ● Right Gable Assemblies (2) Gables/Braces ● ● ● ● ● 9009 Gable Brace (2) Lift and fasten a right and left gable, under angle at corner, to the door track with screws.
Page 25 ● ● ● ● ● Main Roof Beam (1) ● Parts Needed For ● Step 12 ● ● ● ● ● Single Roof Beam (2) Roof Beam/Braces ● ● ● ● ● 9204 Roof Beam Brace (2) Wrap the weather stripping tape around the two joined edges of the left and right gables.
Page 26 ● Parts Needed For ● Step 13 ● ● ● ● ● 8578 Right Roof Panel (1) Right Roof Panel STEP Installing the roof panels is best done with a step ladder. Begin installing 8578 8579 roof panels at the back right corner of the building.
Page 27 ● ● ● ● ● 8578 Right Roof Panel (1) ● Parts Needed For ● ● ● ● ● ● 8579 Left Roof Panel (2) Step 14 ● ● ● ● ● 7571 Roof Panel (2) Roof Assembly ● ● ● ● ● 7743 Roof Panel (2) STEP Install a left roof panel at the left STEP...
Page 28 ● ● ● ● ● 8840 Ridge Cap (1) ● Parts Needed For ● Step 15 ● ● ● ● ● 7571 Roof Panel (2) Ridge Caps & Panels ● ● ● ● ● 8486 Ridge Cap (1) Install the first ridge cap on the completed roof section using bolts and nuts.
Page 29 ● Parts Needed For ● ● ● ● ● ● 8485 Left Side Roof Trim (2) Step 16 ● ● ● ● ● 8836 Right Side Roof Trim (2) Roof Trim Attach the right and left side roof trim to the lower end of the roof pan- els on each side of the building using screws at each panel overlap.
Page 30 ● ● ● ● ● 3719 Door Handle Brace (2) ● Parts Needed For ● ● ● ● ● ● 10475 Right and Left Doors (2) Step 17 ● ● ● ● ● 10497 Horizontal Door Brace (4) Door Assembly ●...
Page 31 ● Parts Needed For ● ● ● ● ● ● Right Door Assembly (1) Step 18 ● ● ● ● ● Left Door Assembly (1) Door Installation & Adjustment Horizontal Door Brace Gable Door Track Door Slide From inside the building, put the bottom of the right door assembly (on your left when you are inside the building) behind door jamb into the...
Page 32 AR108-A LW108 SOME FACTS ABOUT RUST 1. Avoid nicking or scraping the coating surface, Rusting is a natural oxidizing process that occurs inside and out. when bare metal is exposed to moisture. Problem areas include screw holes, unfinished edges, or 2.

This manual is also suitable for:

Lw108