R22 Replacement, 10 Lb., R453a Refrigerant, Newest R22 Drop-in Replacement (2024)


(1) 10 Lb. of R453a Refrigerant in a DOT39 disposable container.

R453a is the newest R22 drop-in replacement refrigerant in the U.S. market.


R453a has been sold worldwide for the past5 years.


It is the closest replacement to R22that operates with very similar discharge pressure, cooling capacity and flow rate as R22.


It requires no oil or system component changes and has the lowest GWP of any HFC R22 replacement in the market at 1664 TAR.


R453a is a PROVEN R-22 replacement now being manufactured in the United States.


R453a Advantages:



  • R453a has the same flow rate as R22.

  • R453a operates at a similar discharge pressure as R22 and lower pressure than R407A & C, R422B & D, R417a and R427A.

  • R453a has the benefit of lower energy consumption;

  • R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications down to -20⁰F evap. temp

  • R453a is the lowest GWP HFC R22 replacement on the market at 1664 TAR and is Zero Ozone Depleting.

  • If a service technician inadvertentlymixes R453a with R22therewill be no harm to the system components or system efficiency.

  • We know this to be true because in Europe, where thereare no regulations against mixing refrigerants, our European sister company has tracked these developments.

  • In the USA,the EPA does not permit or condone the intentional mixing of refrigerants.

  • R453a is good for cap tube and TXV systems.

  • It has been operating in all types of systems with all types of compressors worldwide since 2013.

  • R453a requires no oil or system component changes.


Type and Description

R453a is a non flammable HFC blend.

It is compatible with both traditional mineral and synthetic lubricants so that a retrofit to a different refrigerant oil is not required.

The small amount of hydrocarbons in R453a improve the oil return to the compressor to extend the life of the compressor.

R453a is a direct replacement for R22, providing an easy and long term solution.

Because there is no need to use expensive and hygroscopic synthetic lubricants (POE), the risk of moisture ingress into a refrigeration system is completely avoided.

R453a has similar discharge pressures as R22 and lower discharge temperature than R22; which make R453a a seamless drop-in replacement.

R453a is suitable for use as a replacement for R-22 in existing residential, commercial and industrial air conditioning and refrigeration systems.

Service Work

Because it is a blend, it is recommended that R453a be charged into systems as a liquid as opposed to the gaseous phase. Since there is no need to change the existing lubricant, R453a is straightforward to use, as the published conversion procedure outlines.

Lubricants

R453a is compatible with mineral, alkybenzene and polyolester (POE and PAO) lubricants.

Therefore, there is no need to change the lubricant although compressor manufacturers' recommendations regarding lubricity should be followed.

Materials Compatibility

R453a is compatible with all materials commonly used in refrigeration systems previously charged with R22.

In general, materials which are compatible with R22 can be used with R453a.

lt is recommended to check equipment manufacturer's retrofit literature and obtain recommendations from equipment manufacturers with regard to materials' compatibility.

Environmental Data

None of the components of R453a contains chlorine so that it has no ability to deplete the ozone layer.

As with all hydrofluorocarbons (HFCs), R453ab does have a direct global warming potential (GWP), but this is counterbalanced by its lower Total Equivalent Warming Impact (TEWI).

Tests have shown that R453a has a higher Coefficient of Performance (COP) than R22 in a range of applications including commercial refrigeration systems and heat pumps, both in the heating and cooling mode.

R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications














CANADA CUSTOMERS:

We will include a copy of the eBay invoice with this item as UPS in Canada requires this.

You will have to pay your custom charges and all other charges that apply in Canada.

We have no way of knowing what those charges are or will be.

You can contact your local UPS store with questions on your costs for custom charges.










The charges will apply to the actual cost of goods and does not include shipping costs in the declared value.




If you purchase this item from Canada and refuse delivery from UPS due to your local custom charges, you will be charged a return shipping cost as well as the actual original shipping cost.


FOR USE BY QUALIFIED TECHNICIANS WITHAPPROPRIATEMANUALS.


USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R22.


Refrigerant Can Notes:


INTENDED FOR USE BY QUALIFIED, EPA CERTIFIED TECHNICIANS,WHO ARE TRAINED IN THE USE OF REFRIGERANT AND

REFRIGERANT HANDLING.


**WARNING**

*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.

*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.

*CONTENT UNDER PRESSURE.

*VAPOR HARMFUL SKIN AND EYE IRRITANT.

DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO

BURST AND RESULT IN SERIOUS INJURY.

ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.

USE ONLY IN SYSTEMS DESIGNED FORREFRIGERANT R22.

FORLOW PRESSURE SIDEOF THE SYSTEM ONLY!!!!

DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.

HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.

DO NOT PUNCTURE OR INCINERATE THIS CAN.

DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.

Do not refill can.

KEEP OUT OF REACH OF CHILDREN.







PLEASE CONTACT YOUR LOCAL UPS CENTER AND ASK THEM WHAT YOUR












R22 Replacement, 10 Lb., R453a Refrigerant, Newest R22 Drop-in Replacement (2024)

FAQs

What is the best drop-in replacement for R-22? ›

Freon MO99 is the gold standard for R-22 alternatives and was developed by the same scientists who engineered Freon R-22. The benefits of Freon MO99 include: Capacity — The ability of Freon MO99 to heat or cool a given space is closer to Freon R-22 than any other refrigerant on the market.

What is an acceptable drop-in replacement for R-22? ›

The best replacement for R-22 Freon is usually R-407c. It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants. If a system has R22 in it already you cannot use a replacement refrigerant to simply add to the R22.

What are some R-22 drop-in replacements? ›

NU-22B® Replaces R-22, R-407C, R-422D and R-417A. NU-22B is the only R-22 replacement you need.

Is R453A compatible with R-22? ›

R453A (RS-70) is a non-flammable blend which has an Ozone Depleting Potential (ODP) of 0 and is compatible with both traditional and synthetic lubricants. It is a suitable replacement for R22 in both refrigeration and air- conditioning applications at low and high temperatures.

Is 407C a drop-in replacement for R-22? ›

Freon™ 407C has been a popular R-22 replacement because of its properties, which include: Similar cooling capacity, energy efficiency, and pressures as R-22 in systems. An ability to be topped off after a leak, multiple times, with minimal impact on system performance.

What refrigerant can I substitute for R-22? ›

Freon™ MO29 (R-422D) refrigerant is a low-toxicity, non-ozone depleting hydrofluorocarbon (HFC) replacement for R-22.

Can you mix new 22 with old 22? ›

Mixing refrigerants is not recommended. R-22 replacements should not be used to top off R-22 systems.

What Freon can you mix with R-22? ›

So… what refrigerant can be mixed with R-22? None. You can't mix refrigerants.

Can you top off R-22 with 407C? ›

R-407C should be used only in systems that currently use R-22. It should not be mixed with R-22 or any other refrigerant. 5. The capacity of the existing R-22 thermal expansion valve (TEV) will be approximately the same when using R-407C.

What is the best replacement gas for R22? ›

R417a has physical properties fairly similar to R22 refrigerant. It is best suited to replacing R22 in small (< 15 kW) fixed air conditioning systems. R417A does not require synthetic oil because it contains 3.4 wt% of R600 (butane). R600 is an excellent oil carrier.

Is R422B a drop-in replacement for R22? ›

Product Information. A retrofit blend that is designed to match R22 in air conditioning applications. There is a slight reduction in capacity which would result in slightly longer run times. Systems that were previously retrofitted to R417A can operate with a replacement charge of R422B.

Is MO99 a drop-in for R22? ›

Can Freon™ MO99 be used in systems with capillary tubes sized for R-22? Yes. The mass flow rate and operating pressures of Freon™ MO99 are the closest of all the mineral oil compatible replacement products and will likely perform adequately in an existing R-22 system with a capillary tube expansion device.

Is there a drop-in replacement for R22? ›

The information below will try to dispel some of these myths. Arkema recommends using Forane® 427A (R427A) - The EASY RETROFIT™ for your r-22 retrofit solution. When it comes to drop-ins, the truth is that there are none. The hope of “drop-in” refrigerants has become common over the years.

What is the use of R453A? ›

Refrigeration applications using R-453A can reach down to minus 20°F evaporator temperatures. Applications for R-453A include air conditioning, commercial and industrial refrigeration, chillers, beer cellars, cold storage, refrigerated transport, supermarkets, appliances, dairy chillers, and others.

Is R458A a drop-in for R22? ›

The phase-out of R22 in developing countries will necessitate the use of other refrigerants that can facilitate the transition. R453A, which is also known as RS44B or RS-70, and R458A, which is also known as TdX-20, are comparatively new, non-flammable drop-in replacement for R22.

Is mo 99 a good replacement for R22? ›

Freon™ MO99 has an A1 refrigerant safety classification designating nonflammability and low toxicity under ASHRAE Standard 34. Freon™ MO99 has been proven to be a safe and reliable replacement for R-22 in existing equipment in the U.S. and around the world.

Is 407A a replacement for R22? ›

Freon™ 407A (R-407A) refrigerant is a reliable, stable, and nonflammable option for low- and medium-temperature refrigeration systems. This non-ozone depleting, hydrofluorocarbon (HFC) refrigerant is a replacement for R-22 and provides a lower global warming potential (GWP) alternative to R-404A and R-507.

Can I put R410A in a R22 system? ›

Since R410A refrigerant is charged under higher pressure, charging an R22 system with it will increase the force within the coolant lines. The pressure can become high enough for parts of the system to rupture. At the very least, leaks will occur. Mixing refrigerants is not an option either.

Is R422B a good replacement for R22? ›

Product Information. A retrofit blend that is designed to match R22 in air conditioning applications. There is a slight reduction in capacity which would result in slightly longer run times. Systems that were previously retrofitted to R417A can operate with a replacement charge of R422B.

Top Articles
Latest Posts
Article information

Author: Francesca Jacobs Ret

Last Updated:

Views: 5946

Rating: 4.8 / 5 (48 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Francesca Jacobs Ret

Birthday: 1996-12-09

Address: Apt. 141 1406 Mitch Summit, New Teganshire, UT 82655-0699

Phone: +2296092334654

Job: Technology Architect

Hobby: Snowboarding, Scouting, Foreign language learning, Dowsing, Baton twirling, Sculpting, Cabaret

Introduction: My name is Francesca Jacobs Ret, I am a innocent, super, beautiful, charming, lucky, gentle, clever person who loves writing and wants to share my knowledge and understanding with you.