R22 Replacement, 7.5 Lb., R453a Refrigerant, Newest R22 Drop-in Replacement (2024)


(1) 7.5 Lb. of R453a Refrigerant in a DOT39 disposable container.

R453a is the newest R22 drop-in replacement refrigerant in the U.S. market.


R453a has been sold worldwide for the past5 years.


It is the closest replacement to R22that operates with very similar discharge pressure, cooling capacity and flow rate as R22.


It requires no oil or system component changes and has the lowest GWP of any HFC R22 replacement in the market at 1664 TAR.


R453a is a PROVEN R-22 replacement now being manufactured in the United States.


R453a Advantages:



  • R453a has the same flow rate as R22.

  • R453a operates at a similar discharge pressure as R22 and lower pressure than R407A & C, R422B & D, R417a and R427A.

  • R453a has the benefit of lower energy consumption;

  • R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications down to -20⁰F evap. temp

  • R453a is the lowest GWP HFC R22 replacement on the market at 1664 TAR and is Zero Ozone Depleting.

  • If a service technician inadvertentlymixes R453a with R22therewill be no harm to the system components or system efficiency.

  • We know this to be true because in Europe, where thereare no regulations against mixing refrigerants, our European sister company has tracked these developments.

  • In the USA,the EPA does not permit or condone the intentional mixing of refrigerants.

  • R453a is good for cap tube and TXV systems.

  • It has been operating in all types of systems with all types of compressors worldwide since 2013.

  • R453a requires no oil or system component changes.


Type and Description

R453a is a non flammable HFC blend.

It is compatible with both traditional mineral and synthetic lubricants so that a retrofit to a different refrigerant oil is not required.

The small amount of hydrocarbons in R453a improve the oil return to the compressor to extend the life of the compressor.

R453a is a direct replacement for R22, providing an easy and long term solution.

Because there is no need to use expensive and hygroscopic synthetic lubricants (POE), the risk of moisture ingress into a refrigeration system is completely avoided.

R453a has similar discharge pressures as R22 and lower discharge temperature than R22; which make R453a a seamless drop-in replacement.

R453a is suitable for use as a replacement for R-22 in existing residential, commercial and industrial air conditioning and refrigeration systems.

Service Work

Because it is a blend, it is recommended that R453a be charged into systems as a liquid as opposed to the gaseous phase. Since there is no need to change the existing lubricant, R453a is straightforward to use, as the published conversion procedure outlines.

Lubricants

R453a is compatible with mineral, alkybenzene and polyolester (POE and PAO) lubricants.

Therefore, there is no need to change the lubricant although compressor manufacturers' recommendations regarding lubricity should be followed.

Materials Compatibility

R453a is compatible with all materials commonly used in refrigeration systems previously charged with R22.

In general, materials which are compatible with R22 can be used with R453a.

lt is recommended to check equipment manufacturer's retrofit literature and obtain recommendations from equipment manufacturers with regard to materials' compatibility.

Environmental Data

None of the components of R453a contains chlorine so that it has no ability to deplete the ozone layer.

As with all hydrofluorocarbons (HFCs), R453ab does have a direct global warming potential (GWP), but this is counterbalanced by its lower Total Equivalent Warming Impact (TEWI).

Tests have shown that R453a has a higher Coefficient of Performance (COP) than R22 in a range of applications including commercial refrigeration systems and heat pumps, both in the heating and cooling mode.

R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications














CANADA CUSTOMERS:

We will include a copy of the eBay invoice with this item as UPS in Canada requires this.

You will have to pay your custom charges and all other charges that apply in Canada.

We have no way of knowing what those charges are or will be.

You can contact your local UPS store with questions on your costs for custom charges.










The charges will apply to the actual cost of goods and does not include shipping costs in the declared value.




If you purchase this item from Canada and refuse delivery from UPS due to your local custom charges, you will be charged a return shipping cost as well as the actual original shipping cost.


FOR USE BY QUALIFIED TECHNICIANS WITHAPPROPRIATEMANUALS.


USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R22.


Refrigerant Can Notes:


INTENDED FOR USE BY QUALIFIED, EPA CERTIFIED TECHNICIANS,WHO ARE TRAINED IN THE USE OF REFRIGERANT AND

REFRIGERANT HANDLING.


**WARNING**

*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.

*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.

*CONTENT UNDER PRESSURE.

*VAPOR HARMFUL SKIN AND EYE IRRITANT.

DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO

BURST AND RESULT IN SERIOUS INJURY.

ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.

USE ONLY IN SYSTEMS DESIGNED FORREFRIGERANT R22.

FORLOW PRESSURE SIDEOF THE SYSTEM ONLY!!!!

DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.

HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.

DO NOT PUNCTURE OR INCINERATE THIS CAN.

DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.

Do not refill can.

KEEP OUT OF REACH OF CHILDREN.







PLEASE CONTACT YOUR LOCAL UPS CENTER AND ASK THEM WHAT YOUR












R22 Replacement, 7.5 Lb., R453a Refrigerant, Newest R22 Drop-in Replacement (2024)

FAQs

What is the best drop-in replacement for R22? ›

Freon MO99 is the gold standard for R-22 alternatives and was developed by the same scientists who engineered Freon R-22. The benefits of Freon MO99 include: Capacity — The ability of Freon MO99 to heat or cool a given space is closer to Freon R-22 than any other refrigerant on the market.

What is an acceptable drop-in replacement for R22? ›

The best replacement for R-22 Freon is usually R-407c. It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants. If a system has R22 in it already you cannot use a replacement refrigerant to simply add to the R22.

What are some R22 drop-in replacements? ›

NU-22B® Replaces R-22, R-407C, R-422D and R-417A. NU-22B is the only R-22 replacement you need.

Is R453A compatible with R22? ›

R453A (RS-70) is a non-flammable blend which has an Ozone Depleting Potential (ODP) of 0 and is compatible with both traditional and synthetic lubricants. It is a suitable replacement for R22 in both refrigeration and air- conditioning applications at low and high temperatures.

What is the closest replacement for R22? ›

  • Also Acceptable: R427A, R404A, R407C.
  • Also Acceptable: R422D, R427A.
  • * Note: If compressor is being replaced as part of the service call on a small system, install a POE compressor and retrofit to the better capacity/lower GWP blend.

Is 407C a drop-in replacement for R22? ›

Freon™ 407C has been a popular R-22 replacement because of its properties, which include: Similar cooling capacity, energy efficiency, and pressures as R-22 in systems. An ability to be topped off after a leak, multiple times, with minimal impact on system performance.

Is r407a a drop-in replacement for R22? ›

R-407A is a close match to R-22's capacities and flow rates, making it well suited as a retrofit for R-22 in supermarket and food storage applications. Additionally, R-407A is one of the more energy efficient R-22 retrofit options available for refrigeration applications.

Is R422B a drop-in replacement for R22? ›

Product Information. A retrofit blend that is designed to match R22 in air conditioning applications. There is a slight reduction in capacity which would result in slightly longer run times. Systems that were previously retrofitted to R417A can operate with a replacement charge of R422B.

Is R458A a drop-in replacement for R22? ›

The phase-out of R22 in developing countries will necessitate the use of other refrigerants that can facilitate the transition. R453A, which is also known as RS44B or RS-70, and R458A, which is also known as TdX-20, are comparatively new, non-flammable drop-in replacement for R22.

Can you mix R22 with replacement R22? ›

None. You can't mix refrigerants.

What is the new refrigerant to replace R22? ›

An R-22 Refrigerant Replacement for Direct Expansion Refrigeration. Freon™ MO29 (R-422D) refrigerant is a low-toxicity, non-ozone depleting hydrofluorocarbon (HFC) replacement for R-22.

What is the use of R453a? ›

Refrigeration applications using R-453A can reach down to minus 20°F evaporator temperatures. Applications for R-453A include air conditioning, commercial and industrial refrigeration, chillers, beer cellars, cold storage, refrigerated transport, supermarkets, appliances, dairy chillers, and others.

Which refrigerant blend is replacing R-22? ›

RS-44b (R453a) is the newest R22 drop-in replacement refrigerant in the U.S. market. RS-44b has been sold worldwide for the past 5 years, branded as RS-70 outside the US. It is the closest replacement to R22 that operates with very similar discharge pressure, cooling capacity and flow rate as R22.

Which of the following is an improved drop-in service replacement for R-22? ›

Of the provided options, R-407C is the approved 'drop-in' replacement for R-22, commonly used in air conditioning systems.

What refrigerant can be used as a direct service drop-in substitute for R-22? ›

Explanation: A refrigerant that can be used as a direct service "drop-in" substitute for R-22 in a small appliance is R-407C. R-407C is a blend of hydrofluorocarbons (HFCs) that has similar thermodynamic properties to R-22, making it suitable for use as a refrigerant in systems designed for R-22.

Can you drop 407C on top of R-22? ›

R-407C should be used only in systems that currently use R-22. It should not be mixed with R-22 or any other refrigerant. 5. The capacity of the existing R-22 thermal expansion valve (TEV) will be approximately the same when using R-407C.

Top Articles
Latest Posts
Article information

Author: Kieth Sipes

Last Updated:

Views: 5944

Rating: 4.7 / 5 (47 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Kieth Sipes

Birthday: 2001-04-14

Address: Suite 492 62479 Champlin Loop, South Catrice, MS 57271

Phone: +9663362133320

Job: District Sales Analyst

Hobby: Digital arts, Dance, Ghost hunting, Worldbuilding, Kayaking, Table tennis, 3D printing

Introduction: My name is Kieth Sipes, I am a zany, rich, courageous, powerful, faithful, jolly, excited person who loves writing and wants to share my knowledge and understanding with you.